Queensize Camper
Outdoor shower set with hot water, including mounting box, black 'Dark Edition'
Outdoor shower set with hot water, including mounting box, black 'Dark Edition'
Project Yonder is the exclusive UK stockist of Queensize Camper water system components. This neat outdoor shower set up is easy to install and simple to use!
Shipping time: Usually ships in 3 - 5 days
Couldn't load pickup availability
Description
+
-
Description
The Queensize Camper Outdoor Shower Set represents the complete solution for hot water exterior showers on your campervan. UK exclusive at Project Yonder, this German-engineered system includes everything needed for professional installation: mixer tap with connecting hoses, bulkhead coupling, and custom mounting box with black Dark Edition finish. The included mounting box—with customisable drilling layout—integrates all components neatly, protecting them from the elements while keeping your van's exterior clean and professional-looking. Perfect for rear-mounted outdoor showers, rinse stations, or dedicated exterior wash points.
Complete Kit Includes
Mixer:
- QC hot water mixer with integrated controls
- Single-lever temperature adjustment
- Blends hot/cold water sources seamlessly
- Compact design for space-efficient mounting
- Standard M10X1 thread
Connection Hoses:
- Three pre-assembled connection hoses
- 30cm length each (M10X1 & 10mm hose barb)
- Supply: hot water inlet, cold water inlet
Bulkhead Coupling:
- QC-compatible bulkhead fitting
- 10mm hose barb connection
- Allows flexible exterior water outlet point
- Integrates neatly through mounting box side
Mounting Box:
- High-quality black housing
- Empty (non-pre-drilled) for customisation
- Requires: 14mm hole for bulkhead coupling, 32mm hole for mixer
- Allows precise installation to your specifications
- Fawo-lid compatible (black lid included)
- Foam rubber seals included for weatherproofing
Key Features
- Complete System: Everything included, nothing else needed
- Hot Water Capable: Integrates with heater systems
- Temperature Control: Single-lever mixing adjustment
- Customisable Installation: Non-pre-drilled box fits your layout
- Professional Mounting: Neat, integrated housing
- Weather Protected: Sealed box shields components from elements
- Dark Edition Finish: Sleek aesthetic throughout
- Easy Assembly: Simple connection points
- Versatile Positioning: Mount anywhere on vehicle exterior
- Quality Components: German-engineered throughout
- Lid Customisation: Compatible with all Fawo lids for colour options
What Makes This System Special
This isn't just a collection of components thrown together—it's an engineered system designed specifically for vanlife outdoor showers. The inclusion of the mounting box solves the problem most DIYers face: how do you neatly integrate all these components while protecting them from weather? The box provides professional integration, shielding components while maintaining a clean appearance on your vehicle exterior. The customisable drilling means you can arrange the box layout exactly as you need, not as some pre-set design dictates. The complete inclusion of mixer, bulkhead coupling, hoses, and box means everything is compatible and sized to work together. German Queensize Camper engineering ensures each component will survive the vibration and temperature extremes of mobile living. The dark finish integrates beautifully with modern van aesthetics rather than looking utilitarian. Perfect for creating a genuine rinse station, outdoor shower, or multi-purpose exterior wash point.
Perfect for Mercedes Sprinter, VW T5/T6, and custom campervan outdoor water system installations. Exclusively available at Project Yonder.
Compatible with
+
-
Compatible with
Compatible with all campervan conversions, expedition trucks and boats.
Additional info
+
-
Additional info
Technical Specifications
Mounting Box:
- Dimensions: Height: 13.2cm, Width: 12.6cm, Depth: 3.5cm
- Material: Plastic housing with rubber seals
- Lid: Black included, Fawo-compatible
- Hole Requirements: 14mm (bulkhead), 32mm (mixer)
- Seal Type: Foam rubber gaskets included
Mixer:
- Type: Hot/cold water mixer
- Operation: Single-lever control
- Temperature Range: Up to 60°C hot water
- Pressure Rating: 1-3 bar operating pressure
- Finish: Dark Edition
- Mounting Hole: 32mm
- Connections: 3x M10x1 thread
- Max Wall thickness: 25mm
Hoses:
- Hose Type: M10x1 & 10mm barb connections
- Hose Length: 3 × 30cm pre-assembled
- Material: Flexible rubber/composite
Bulkhead Coupling:
- Coupling Type: Quick-connect with 10mm barb
Installation Considerations
Exterior Mounting Location:
- Consider wind protection if possible
- Position away from living area windows
- Allow drainage area beneath shower
- Ensure easy access for repairs/adjustments
Care & Maintenance
Summer:
- Check seals haven't dried out
- Inspect hoses for UV damage
- Test mixer operation after heat exposure
- Ensure drainage hasn't become blocked
Winter/Cold Storage:
- Critical Step: Drain entire system before freezing risk
- Close cartridge to middle position
- Connect hose to pump outlet
- Open shower volume control fully
- Blow air through pipes from pump side
- Disconnect hose, let remaining water drain
- Leave cartridge in middle position during storage
- Protects system from frost damage
Product disclaimer
Project Yonder does not accept any liability nor hold responsibility for the regulations you need to abide by or any problems you might encounter with this product.
Shipping
+
-
Shipping
Shipping Time:
Usually ships in 3 - 5 days.
Shipping times vary. You will find the estimated shipping time for each product on the product page. If you are unsure or you need your parts sooner, please contact us directly and we will do our best to accommodate – hello@projectyonder.co.uk.
Shipping Methods:
Orders are shipped either by parcel or pallet, depending on the product and order size. Some products are only shipped via pallet, and adding such an item to your order will automatically calculate pallet shipping costs at checkout.
Local Pickup:
You can skip shipping fees by selecting local pickup at our workshop in Hastings, (Unit 8, Platform Business Centre, Haywood Way, Hastings TN35 4FB). Collection must be arranged in advance.
You will receive an email when your order is ready for collection.
Return Policy:
You may return products within 14 days of receiving or picking up your order, provided they are in a new, unused condition and returned in saleable condition.
Return Conditions:
Accepted Returns:
Returns due to manufacturing defects or shipping errors will be covered.
If a return is authorised for reasons not related to defects, the customer is responsible for packaging, insurance, and return shipping costs. Refunds are issued once the product is received and inspected.
Non-Returnable Items:
Products that have been drilled, modified, or installed
(e.g., Cargo Boxes with drilled mounting holes, Van Der Moon panels with drilled holes etc.).
Items returned in damaged or unsellable condition.
To initiate a return, please contact us at
hello@projectyonder.co.uk for return authorisation before shipping your item.
Liability Disclaimer:
Any modifications, drilling, or installation of products on a vehicle are at the owner’s risk. Project Yonder does not offer refunds, compensation, or repairs for modifications made to a vehicle, even in the case of a product return.
